0116 299 8000

MAGNEHELIC PRESSURE GAUGE - Series 2000

This unit has become a standard for the Dust Extractionand Air Flow industries. Many years of reliable service have made it the number one choice for accuracy, longevity and cost-effectiveness. Constructed from optimum materials, it features multiple mounting capability (surface, panel, pipe etc.); a low distortionlens; an easy-to-read precision dial and pointer; jeweled bearings; zero adjustment; pressure sealed die-cast aluminiumcase with blow-out plug for safetyand a range of scales and models to cover just about every practical application.This product is intended for use with air and compatible gases only. Standard gauges are not suitable for use with hydrogen and may even give off an explosive and toxic gas.Each gauge is supplied complete with 2 connectors to suit 4/5mm bore nylon tube, 2 plugs to blank off redundant ports aswell as screws and fittings for panel mounting. For surface mounting, just use 3 off 6-32 screws approximately 6mm longer than the thickness of the mounting surface or easier still use a Surface Mounting Plate (Pt. No. A368). You will find various accessories to facilitate installing your gauge easily aavailable.Maintenance is no problem - just keep it clean and periodically re-zero (if required). No lubrication or other action is needed.

PRODUCT INFORMATION

DIMENSION DRAWING

MINIHELIC II PRESSURE GAUGE

This has it all - it is compact, costeffective, relaible and accurate.
Either panel or surface mounted with easy-to-read pointers and
dials, calibrated in Imperial and Metric systems, it is safe for
pressures up to 200kPa. It can be used almost anywhere the larger
Magnelic is used, with only small sacrifices of accuracy and range.
Robust enough to cope with rough handling and exposure this
little gem comes complete with over pressure protection and the
capability of single hole panel mounting. Inadvertant or transient
pressures beyond the stated range will not damage the gauge
below the rated total pressure. The lens and rear housing are
demountable for ease of replacement, servicing, zeroing etc.
The gauge is integrally fitted with barbed tubing connections
(fir tree fittings) to suit 5mm I/D tubing.

PRODUCT INFORMATION

DIMENSION DRAWING